Wholesale Aluminum Kids Mountain Bike Supplier

  • Home
  • Products
  • Wholesale Aluminum Kids Mountain Bike Supplier

Wholesale Aluminum Kids Mountain Bike Supplier

Wholesale Aluminum Kids Mountain Bike Supplier

This page outlines the engineering specifications of aluminum-framed mountain bikes built for children aged 5 to 12, focusing on the data that procurement engineers and OEM buyers evaluate before placing wholesale orders.

Frame Material and Geometry

The main triangle uses 6061-T6 aluminum alloy with a minimum tensile strength of 310 MPa and a yield strength of 275 MPa. Tube diameters range from 28.6 mm for the down tube to 31.8 mm for the seat tube, providing a stiffness-to-weight ratio suitable for riders up to 45 kg. The frame weight, including welds and gussets, averages 1.8 kg for a 12‑inch wheel size.

Geometry features a 70 mm head tube angle, 73 mm seat tube angle, and a 380 mm chainstay length, which together produce a low center of gravity and stable handling on loose terrain. The bottom bracket drop is set at 30 mm to improve pedal clearance while maintaining a comfortable standover height of 560 mm for the smallest size.

Component Specifications

Drivetrain options include a single‑speed crank with a 32T chainring paired to a 14‑28T freewheel, giving a gear range of 2.3‑4.6. For models requiring multiple gears, a Shimano‑compatible 6‑speed cassette (14‑28T) with a rear derailleur is available.

Braking is provided by V‑type rim brakes with alloy levers, delivering a stopping distance of under 2.5 m from 15 km/h on dry pavement. Optional mechanical disc brakes (160 mm rotor) can be specified for wet‑condition performance.

Wheels are built with 20 mm wide aluminum rims, 32‑hole stainless steel spokes, and sealed cartridge hubs. Tire width is 2.0 inches with a knobby tread pattern rated for 30 psi maximum pressure.

wholesale aluminum kids mountain bike supplier
Parameter Typical Value Notes
Frame Alloy 6061‑T6 Heat‑treated for strength
Wheel Size 12‑inch (ISO 305) Fits 2.0‑inch tires
Fork Travel 30 mm (optional suspension) Rigid fork standard
Brake Type V‑rim (optional disc) Lever reach adjustable
Gear Range Single‑speed 32T/14‑28T or 6‑speed 14‑28T Shimano compatible
Max Rider Weight 45 kg Includes safety factor 1.5
Approx. Total Weight 7.5 kg (single‑speed) Varies with options

Manufacturing Process

Frames are produced by hydroforming the main tubes to achieve variable wall thickness, followed by TIG welding using AC‑ER70S‑2 filler rod. Post‑weld, the assembly undergoes a T6 solution heat treatment and artificial aging to restore alloy strength.

Dropouts are machined from 6061 bar stock and press‑fit into the rear stays, providing precise axle alignment. Cable routing is internal where possible, with external guides for brake housing to reduce friction.

Quality Control and Testing

Each frame receives a dimensional inspection using a CMM with a tolerance of ±0.2 mm on critical interfaces (head tube, seat tube, bottom bracket). Fatigue testing is performed on a sample set to EN 14764 standards, targeting 100 000 cycles at 1.5× the maximum rider load.

Surface preparation includes a phosphate conversion coating before powder coating; coating thickness is measured with a magnetic gauge to ensure 80‑120 µm uniformity. Adhesion is verified via cross‑hatch tape test (ASTM D3359) with a target rating of 5B.

Applications and Use Cases

Wholesale buyers typically integrate these bicycles into rental fleets at bike parks, where low maintenance and corrosion resistance reduce service intervals. OEMs use the frames as a base for custom‑painted models sold through specialty retail channels.

The lightweight aluminum construction also suits institutional programs such as school‑based cycling clubs, where frequent handling and storage demand a frame that resists denting and remains easy to maneuver for young riders.

Customization Options

  • Frame sizes: 10‑inch, 12‑inch, 14‑inch wheel equivalents
  • Color choices: standard powder coat (black, white, red, blue) or custom Pantone match
  • Brake type: V‑rim, mechanical disc, or hydraulic disc (adapter)
  • Drivetrain: single‑speed, 6‑speed, or 7‑speed freewheel
  • Accessories: kickstand, chain guard, bell, reflectors

Ordering and Lead Time

Minimum order quantity is 50 units per model, with sample units available upon request for approval testing. Production lead time averages 30 days after receipt of deposit and final artwork, subject to component availability.

Shipping is arranged in palletized cartons with corner protection and moisture‑barrier lining; each carton holds five bicycles and is labeled with part number and destination.

To discuss technical details, request a quotation, or arrange a sample shipment, please contact our sales team.

Request a quote