Oem Entry Level Fat Tire Mountain Bike For Kids Factory

  • Home
  • Products
  • Oem Entry Level Fat Tire Mountain Bike For Kids Factory

Oem Entry Level Fat Tire Mountain Bike For Kids Factory

OEM Entry Level Fat Tire Mountain Bike for Kids – Factory Overview

This model is designed for young riders aged 7 to 12 who need a stable platform for off‑road trails. The frame geometry emphasizes a low stand‑over height and a wide rear triangle to accommodate 20‑inch fat tires. All dimensions are derived from ISO 5775 standards for children’s bicycles.

Design and Frame Geometry

The main triangle uses 6061‑T6 aluminum alloy with a wall thickness of 1.2 mm on the down tube and 1.0 mm on the top tube. Head tube angle is 69°, seat tube angle 73°, and chainstay length measures 380 mm to provide balanced handling. Bottom bracket drop is set at 35 mm to keep the crank clearance above ground obstacles.

Seat tube length is adjustable from 340 mm to 380 mm via a quick‑release clamp, allowing the bike to grow with the child. The rear dropout spacing is 135 mm, compatible with standard hub axles. These specifications are verified through coordinate measuring machine (CMM) inspection before welding.

Wheel and Tire Specifications

Rims are double‑wall aluminum with an internal width of 30 mm, designed to support tire widths from 3.0 in to 4.0 in. The recommended inflation range is 15–25 psi, providing a contact patch that improves traction on loose soil. Tread pattern features spaced lugs with a height of 8 mm to shed mud while maintaining low rolling resistance.

Each wheel undergoes a radial and lateral run‑out test, accepting less than 0.5 mm deviation. Spoke tension is set to 110 ± 10 Nf using a calibrated tensiometer. These controls ensure true wheels after prolonged off‑road use.

Drivetrain and Braking System

The crankset is forged aluminum with a 140 mm length, paired with a 28‑tooth chainring and a 14‑28 tooth freewheel, giving a gear ratio range of 1.0–2.0. Shift lever reach is adjustable from 65 mm to 80 mm to suit varying hand sizes. Chain tension is maintained via a horizontal dropout with a 10 mm adjustment range.

Braking is provided by mechanical V‑brake calipers with 90 mm arms, delivering a lever pull force of 25 N at the rim. Brake pads are replaceable sintered metal with a friction coefficient of 0.45. Cable routing uses internal guides to reduce dirt ingress.

Safety and Load Testing

Frames are subjected to a fatigue test of 100,000 cycles at 150 % of the maximum rider weight (60 kg). Impact testing follows ASTM F963‑17, dropping a 5 kg mass from 150 mm onto the top tube; acceptable deflection is under 2 mm. The maximum recommended rider weight is 45 kg, with a static load limit of 80 kg.

All fasteners are torque‑checked to manufacturer specifications: seat clamp 5 Nm, stem bolts 6 Nm, brake bolts 4 Nm. A final visual inspection checks for weld continuity, paint adhesion (minimum 4 B per ASTM D3359), and proper decal placement.

Customization Options

  • Frame color: powder coat in RAL 9005 (black), RAL 3000 (red), or custom Pantone upon request.
  • Graphics: silk‑screened decals or heat‑transfer logos, minimum order 50 pcs.
  • Component upgrades: stainless steel spokes, sealed cartridge bottom bracket, or hydraulic disc brake kit (adapter bracket included).
  • Tire selection: alternative tread patterns (semi‑slick, knobby) with widths up to 4.2 in.
  • Packaging: standard carton, palletized bulk, or custom foam inserts for direct‑to‑retail.

Quality Control Inspection Points

oem entry level fat tire mountain bike for kids factory
Inspection Step Method Acceptance Criteria
Raw material composition Spectrometer analysis 6061‑T6 alloy, Si 0.6‑1.2 %, Fe ≤0.7 %
Frame weld penetration Ultrasonic testing ≥90 % penetration, no cracks
Wheel trueness Dial indicator run‑out Radial ≤0.5 mm, lateral ≤0.5 mm
Brake lever force Gauge measurement 20‑30 N at rim
Final assembly torque Torque wrench audit ±10 % of spec

Packaging and Logistics

Each bike is placed in a five‑layer corrugated carton with internal foam corners protecting the dropouts and handlebar. Carton dimensions are 140 mm × 230 mm × 780 mm (L × W × H) and gross weight is approximately 18 kg. For pallet shipment, 20 cartons are stacked per pallet, secured with stretch film and corner boards.

Export packaging complies with ISPM‑15 for wooden pallets and includes a silica gel packet (5 g) to control moisture. Tracking labels are affixed to each carton, providing barcode scanning for warehouse management.

Lead Time and Sample Arrangement

Standard production lead time is 30 working days after receipt of approved artwork and deposit. Sample units can be shipped via air freight within 7 working days, with sample cost credited toward the first bulk order.

For projects requiring tooling changes (e.g., custom frame geometry), an additional 10 working days is allocated for prototype validation. All lead times are subject to component availability and are confirmed in the quotation.

Frequently Asked Questions

  • Can the frame dimensions be altered? Yes, the seat tube length and chainstay length can be adjusted within ±15 mm based on tooling feasibility.
  • What information is needed for a quotation? Required details include order quantity, desired frame color, graphics specifications, any component upgrades, and delivery destination.
  • Which materials are available for the fork? The standard fork is 6061‑T6 aluminum with a 28 mm steerer; optional carbon‑blade forks are available upon request.
  • How is quality inspected before shipment? See the Quality Control Inspection Points table; each batch undergoes a 5 % random audit for assembly torque and brake performance.
  • What packaging options exist for retail‑ready units? Options include individual cartons with full‑color printing, palletized bulk, or custom foam inserts designed for shelf display.

Request a Quote or Sample