Factory Price Downhill Enduro Mountain Bike for Kids Exporter
This model is engineered for riders aged 10‑14 who demand the handling characteristics of a full‑suspension downhill bike while accommodating lower stand‑over heights and lighter rider weights. The design balances stiffness for precise cornering with compliance to absorb rough terrain impacts.
Frame Geometry and Materials
Geometry directly influences stability at speed and maneuverability in tight switchbacks. The frame uses hydroformed aluminum alloy with optional carbon‑fiber front triangle for weight‑sensitive builds.
| Parameter |
Typical Value |
| Head Tube Angle |
65.5° (±0.5°) |
| Seat Tube Angle |
75.0° (±0.5°) |
| Chainstay Length |
425 mm (±5 mm) |
| Wheelbase (Medium) |
1080 mm (±10 mm) |
| Stand‑Over Height (Medium) |
720 mm (±10 mm) |
| Frame Material |
6061‑T6 aluminum (optional carbon front triangle) |
| Frame Weight (Medium) |
3.2 kg (aluminum) / 2.8 kg (carbon option) |
Suspension System
Travel amount and tuning range determine how the bike absorbs large impacts while maintaining pedaling efficiency on climbs.
- Front fork: 180 mm travel, air spring with external rebound and compression adjusters.
- Rear shock: 170 mm travel, coil‑over option available, adjustable low‑speed compression and rebound.
- Linkage ratio: 2.8:1, providing progressive feel for bottom‑out resistance.
- Bushings: sealed cartridge units with < 0.02 mm play tolerance.
- Maximum rider weight: 60 kg (front) / 55 kg (rear) for optimal sag settings.
Drivetrain and Braking
Gear range and brake torque are selected to suit steep descents and the limited power output of younger riders.
| Component |
Specification |
| Shifters |
12‑speed, indexed, trigger type |
| Cassette |
10‑51 t, wide range for steep climbs |
| Chain |
12‑speed, nickel‑plated, 110 links |
| Front Brake |
200 mm hydraulic disc, 4‑piston caliper |
| Rear Brake |
180 mm hydraulic disc, 2‑piston caliper |
| Brake Fluid |
Mineral oil, boiling point > 260 °C |
Wheels and Tires
Rim width and tire profile affect grip, rolling resistance, and impact protection on loose surfaces.
- Rim: 30 mm internal width, alloy, tubeless ready, 28 hole.
- Front tire: 2.4 in width, 60 tpi casing, dual‑compound rubber.
- Rear tire: 2.3 in width, reinforced sidewall for puncture resistance.
- Recommended pressure: 18‑22 psi front, 20‑24 psi rear (tubeless).
- Wheel weight (pair): ≈ 1 800 g.
Applications and Use Cases
The bike is intended for purpose‑built downhill tracks, bike parks, and enduro stages where young riders need confidence‑inspiring handling without exceeding their strength limits. Lower stand‑over height facilitates quick dismounts on technical sections, while adjustable geometry allows tuning as the rider grows.
Customization Options
Buyers can tailor the bike to specific market requirements or rider preferences through a range of factory‑offered options.
- Frame sizes: Small (12‑inch), Medium (14‑inch), Large (16‑inch) measured as seat tube length.
- Color choices: matte black, gloss white, team red, custom Pantone upon request.
- Suspension tuning: adjustable air spring rates, optional coil shock, alternative linkage ratios.
- Brake rotor sizes: 180 mm / 200 mm front, 160 mm / 180 mm rear.
- Drivetrain: 10‑speed or 12‑speed, Shimano, SRAM, or compatible alternatives.
- Accessories: integrated chain guide, dropper post (100 mm travel), protective frame guards.
Quality Control and Testing
Each frame undergoes a defined sequence of inspections to verify structural integrity and finish consistency before assembly.
- Visual inspection: weld bead uniformity, surface coating thickness ≥ 80 µm.
- Dimensional check: critical tolerances (±0.2 mm) on mounting points using CMM.
- Fatigue test: 100 000 cycles at 2.5 × rider weight load on rear triangle.
- Impact test: drop‑weight 20 J onto downtube, no crack propagation.
- Corrosion resistance: salt‑spray 48 h, rating ≥ 9 per ASTM B117.
- Final assembly verification: torque values on bolts recorded, brake bleed pressure < 5 psi variance.
Packaging and Export
Packaging is designed to protect the bike during long‑haul transit while facilitating efficient container loading.
- Primary protection: double‑wall corrugated cardboard with edge protectors.
- Secondary protection: closed‑cell foam inserts around fork, rear triangle, and wheels.
- Palletizing: standard 1200 × 1000 mm pallet, max stack height 2 m.
- Container loading: 20‑ft container holds 18‑20 units (depending on pallet configuration).
- Marking: handling symbols, “Fragile – Keep Dry”, and QR code linking to assembly manual.
Frequently Asked Questions
- Can dimensions be customized? Yes, frame size, wheel diameter, and suspension travel can be adjusted per project requirements.
- What information is required before quotation? Desired frame size, brake type, drivetrain level, quantity, and delivery destination.
- What materials are available? 6061‑T6 aluminum is standard; carbon‑fiber front triangle is optional.
- How is quality inspected? See the Quality Control section – includes dimensional, fatigue, impact, and corrosion checks.
- What packaging methods are available? Standard cardboard‑foam pallet pack; custom crating available on request.
- How are export shipments protected? Foam cushioning, moisture‑barrier liners, and secure strapping to pallets.
- What is the typical production lead time? 25‑35 working days after receipt of deposit and final specifications.
Contact Us for a Quote
To discuss specifications, request a sample, or obtain a detailed quotation, please reach out via the contact form.
Request a Quote