When selecting a kids mountain bike for wholesale distribution, engineers evaluate frame geometry, material strength-to-weight ratio, component durability, and safety standards applicable to riders aged 5‑12 years.
This page details the measurable characteristics that define a factory‑priced offering from a top supplier, focusing on design parameters that affect performance, maintenance, and long‑term value.
The frame uses 6061‑T6 aluminum alloy tubes with a wall thickness of 1.2 mm on the down tube and 0.9 mm on the seat stays, providing a tensile strength of approximately 310 MPa while keeping the overall frame mass under 1.4 kg for a 20‑inch wheel size.
Geometry includes a 68° head tube angle, 73° seat tube angle, and a chainstay length of 380 mm, which yields a wheelbase of 950 mm and a standover height suitable for inseam measurements ranging from 45 cm to 55 cm.
A coil‑sprung suspension fork offers 40 mm of travel, with a spring rate of 2.5 N/mm and a preload adjustable via a top‑cap bolt. The fork stanchions are 28 mm diameter, hard‑chrome plated for corrosion resistance.
Travel is limited to prevent excessive pedal bob on smooth surfaces while still absorbing impacts from typical trail obstacles such as roots and rocks up to 5 cm high.
Mechanical disc brakes are specified with 160 mm rotors and a lever reach adjustable from 20 mm to 30 mm, delivering a braking torque of approximately 80 Nm under a 150 N lever force.
Alternative V‑brake configurations are available upon request, featuring 90 mm arm length and a cable pull ratio of 2:1, suitable for regions where disc brake service infrastructure is limited.
A 7‑speed Shimano‑compatible freewheel provides gear ratios ranging from 2.2 (low) to 4.8 (high), calculated from a 22‑t chainring and a 12‑28 t cassette.
Shift actuation uses a standard index‑compatible shifter with a cable travel of 2.5 mm per gear, ensuring reliable indexing across the temperature range ‑10 °C to +40 °C.
Wheels are built with double‑wall alloy rims, 20 mm internal width, and 28 mm external width, laced with 28 mm stainless steel spokes in a 3‑cross pattern.
Tires are 2.1‑inch (54 mm) width, featuring a knob height of 4.5 mm and a tread pattern designed for loose over hard surfaces, with a recommended inflation pressure of 30‑45 psi.
The complete bike weighs between 9.5 kg and 10.5 kg depending on component selection, which corresponds to a payload capacity of up to 40 kg (rider plus gear) while maintaining a safety factor of 2.0 on frame stress under static load.
Each frame undergoes a visual inspection for weld continuity, followed by a destructive test on a sample batch where the down tube is subjected to a three‑point bend test until deflection reaches 10 mm, confirming elastic recovery within 5 %.
Component assemblies are checked for torque specifications: stem bolts to 5 Nm, handlebar clamp to 6 Nm, crank bolts to 35 Nm, and brake caliper mounting bolts to 8 Nm, using calibrated torque wrenches.

| Parameter | Standard Configuration | Upgrade Configuration |
|---|---|---|
| Frame Material | 6061‑T6 Aluminum | 6061‑T6 Aluminum with hydroformed tubes |
| Fork Travel | 40 mm coil spring | 60 mm air‑sprung with lockout |
| Brake Type | Mechanical Disc (160 mm) | Hydraulic Disc (180 mm) |
| Gear Range | 7‑speed (22‑t/12‑28 t) | 8‑speed (22‑t/11‑34 t) |
| Weight (approx.) | 9.8 kg | 10.4 kg |
The bike is suited for municipal recreation programs, school physical education curricula, and rental fleets in bike parks where durability, low maintenance, and adjustable fit are prioritized.
Frame geometry accommodates rapid growth spurts, allowing a single model to serve riders across two consecutive size brackets, reducing inventory complexity for distributors.
Minimum order quantity is 50 units, with a standard production lead time of 30‑35 days after receipt of approved artwork and payment terms.
Samples can be arranged within 7‑10 days, subject to tooling availability, and are shipped via express courier with insurance coverage.
Contact our technical sales team to request a quotation or discuss customization.
© SKYS Bicycle Technology Co., Ltd. All Right Reserved. Sitemap | Privacy Policy