This model targets the 20‑inch wheel segment for youth mountain biking, focusing on geometry that supports developing riders while maintaining durability for off‑road conditions. The frame uses 6061‑T6 aluminum alloy with a hydroformed top tube to reduce weight without compromising impact resistance.
Intended for OEMs and distributors seeking a reliable platform for youth bike lines, the design balances handling stiffness with comfort through a tapered head tube and a slightly slack seat angle.
Key dimensions include a 380 mm reach, 410 mm stack, and a 70 mm bottom bracket drop, providing a low center of gravity that improves stability on loose terrain. The chainstay length measures 350 mm, allowing adequate rear‑wheel clearance for wider tires.
The head tube angle sits at 69°, delivering predictable steering response, while the seat tube angle of 73° positions the rider for efficient power transfer during climbs.
The bike features a Shimano Tourney TX800 7‑speed rear derailleur paired with a 14‑28T freewheel, offering a gear range suitable for varied gradients encountered on beginner trails. Crankset length is 140 mm with a 32T chainring, optimized for the cadence of younger riders.
Shifters are trigger‑style, indexed for precise gear changes, and the chain is a 1/2×1/8″ KMC Z410 with anti‑rust coating for extended service life in humid environments.
A 60 mm travel coil‑spring fork with 28 mm stanchions provides basic shock absorption while keeping unsprung mass low. The fork includes a preload adjuster to tune sag according to rider weight, typically ranging from 20 kg to 40 kg.
Damping is non‑adjustable, relying on a fixed‑orifice valve that balances rebound speed for small‑bump compliance without excessive fork dive under braking.
Wheels are 20‑inch, 32‑hole double‑wall rims made from 6061 aluminum, machined for a 19 mm internal width that accommodates 2.0‑2.2 in tires. Spokes are stainless steel 14‑gauge with brass nipples, providing corrosion resistance and consistent tension retention.
Tires feature a knobby tread pattern with a 2.1 in width, 30 TPI casing, and a rubber compound rated for 50 Shore A hardness, delivering grip on loose soil while resisting puncture from sharp debris.
Frame tubes are cut to length using CNC saws, then mitered and TIG welded in a fixture‑controlled environment to ensure angular accuracy within ±0.5°. Post‑weld, frames undergo a six‑stage pretreatment followed by powder coating with a UV‑stable polyester finish.
Component assembly follows a linear line where torque‑controlled tools fasten critical bolts to manufacturer specifications, preventing over‑tension that could lead to fatigue cracks. Final inspection includes a 15‑point check covering alignment, brake function, and drivetrain indexing.
Each batch undergoes random sampling for tensile strength of the frame joints, targeting a minimum ultimate tensile strength of 310 MPa. Paint adhesion is measured via cross‑hatch test, requiring a rating of 4B or better per ASTM D3359.
Functional testing includes a 30‑minute ride simulation on a dynamometer to verify smooth shifting under load and brake lever effort not exceeding 2.5 N for safe stopping distance.
Distributors benefit from a standardized platform that reduces SKU complexity while offering reliable performance in entry‑level mountain bike markets. OEMs can integrate the frame into branded lines, leveraging its proven geometry to meet safety regulations such as EN 14764 for youth bicycles.
The bike’s modular design allows easy swapping of components, facilitating custom builds for regional preferences without requiring re‑tooling of the frame production line.

| Parameter | Value |
|---|---|
| Wheel Size | 20 inch (ISO 406) |
| Frame Material | 6061‑T6 Aluminum |
| Fork Travel | 60 mm Coil Spring |
| Drivetrain | Shimano Tourney TX800 7‑Speed |
| Brake Type | V‑Brake, Aluminum Arms |
| Weight (approx.) | 10.5 kg |
| Recommended Rider Height | 115‑135 cm |
| Maximum Load | 45 kg |
The base geometry is fixed; however, OEMs can request alternative tube lengths or angle variations through a custom quoting process, subject to tooling feasibility.
Required details include annual volume target, preferred component specifications, desired finish color, and any branding or decal requirements.
Standard offering is 6061‑T6 aluminum; alternative alloys such as 7005 are available upon request for projects requiring higher tensile strength.
Each unit undergoes a 15‑point functional check, frame joint tensile sampling, and paint adhesion testing as outlined in the quality control section.
Bikes are packed in double‑wall corrugated cartons with corner protectors, foam spacers for the fork and handlebars, and a moisture‑barrier liner to prevent corrosion during transit.
© SKYS Bicycle Technology Co., Ltd. All Right Reserved. Sitemap | Privacy Policy