This model is designed for riders aged 9 to 12 years with a height range of 130 cm to 150 cm, featuring a 29‑inch wheel diameter that improves roll‑over capability on mixed terrain while maintaining a manageable overall length for younger users.
The frame utilizes 6061‑T6 aluminum alloy with a wall thickness of 1.2 mm in the main tubes, providing a tensile strength of approximately 310 MPa and a weight saving of roughly 1.4 kg compared to steel alternatives of similar size.
Front suspension consists of a coil‑spring fork with 80 mm travel, calibrated to a spring rate of 2.5 N/mm, which absorbs impacts from roots and rocks while limiting pedal bob under steady pedaling.
Braking is handled by hydraulic disc brakes with 160 mm rotors front and rear, delivering a consistent lever force of 120 N at the pad interface and a fade‑resistant performance up to 200 °C operating temperature.
The geometry includes a 480 mm top tube length, a 70 mm head tube angle, and a 430 mm chainstay length, which together produce a wheelbase of 1050 mm, offering stable tracking at speeds up to 25 km/h while allowing nimble cornering on tight trails.
Seat tube angle is set at 73°, positioning the saddle for efficient power transfer and providing a standover clearance of 220 mm when measured at the top tube midpoint, reducing the risk of contact during dismounts.
All welds are performed using TIG technology with post‑weld heat treatment to relieve residual stresses, ensuring fatigue life exceeding 10⁵ cycles under typical off‑road loading spectra.
Drivetrain comprises a Shimano Altus 2×8 speed system with a 22‑32T crankset and an 11‑34T cassette, yielding a gear range of 308 % and a chain tension variation of less than 5 % across the shift map.
Rims are double‑wall aluminum with an inner width of 23 mm, compatible with 2.1‑2.4 in tires, and feature a spoke count of 32 per wheel using stainless steel 2.0 mm spokes tensioned to 110 kgf.
Handlebars are 620 mm wide with a 15 mm rise, constructed from 6061 alloy and fitted with lock‑on grips measuring 130 mm in length, providing a grip diameter of 30 mm for optimal hand placement.
| Parameter | Typical Value | Notes |
|---|---|---|
| Wheel Size | 29 in (ISO 622) | Standard for youth mountain category |
| Frame Material | 6061‑T6 Aluminum | Wall thickness 1.2 mm |
| Front Fork Travel | 80 mm | Coil‑spring, 2.5 N/mm rate |
| Brake Type | Hydraulic Disc | 160 mm rotors |
| Gear Range | 308 % | 22‑32T crank, 11‑34T cassette |
| Total Weight | 11.8 kg | Includes pedals, excludes accessories |
| Recommended Rider Height | 130‑150 cm | Corresponds to inseam 55‑65 cm |
The 29‑inch wheel size reduces the angle of attack on obstacles, making the bike suitable for forest trails, gravel paths, and light singletrack where maintaining momentum is more critical than rapid acceleration.
Because the frame geometry prioritizes stability, the bike is frequently selected by school cycling clubs and community youth programs that require a predictable handling profile for novice riders developing off‑road skills.
OEMs looking to assemble complete kits for retail chains often pair this frame with a standardized component set to simplify inventory management while meeting EN 14766 safety thresholds for youth bicycles.
Each frame undergoes a dimensional inspection using a CMM with a tolerance of ±0.2 mm on critical tube lengths and angles, ensuring consistency across production batches.
Fatigue testing is performed on a simulated trail load spectrum representing 200 km of mixed terrain, with acceptance criteria set at no crack initiation after 150 000 cycles.
Brake performance is validated on a dynamometer measuring pad pressure decay; units must retain at least 85 % of initial force after 30 min continuous operation at 180 °C.
The front and rear center distances are fixed; however, stem length and seatpost setback can be varied within ±20 mm to accommodate a range of inseam measurements while preserving handling characteristics.
Please provide the desired component level, brake rotor size, handlebar width, and any custom color or logo specifications. Quantity and delivery timeline also affect pricing.
Standard offering is 6061‑T6 aluminum. Alternative alloys such as 7005 or scandium‑enhanced variants are available upon request for projects requiring higher strength‑to‑weight ratios.
Each bike receives a final assembly check that includes torque verification of critical bolts (stem, seatpost clamp, crank arms) to manufacturer specifications, followed by a functional test of brakes and gear shifting on a low‑speed roller.
Units are packed in double‑wall cardboard boxes with interior foam protectors for the fork, derailleur, and wheels. Boxes are strapped onto pallets and wrapped in stretch film to prevent moisture ingress during transit.
To discuss your specific requirements, obtain a detailed quote, or arrange a sample shipment, please use the inquiry link below.
Request a Quote© SKYS Bicycle Technology Co., Ltd. All Right Reserved. Sitemap | Privacy Policy